Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fog lights

To replace the fog light on a Ford Fiesta, you must completely remove the front bumper by unscrewing all the screws that secure it and disconnecting the connectors, including those for the fog lights. This will allow access to the inside of the bumper, where you can loosen the screws securing the fog light. Once the screws are completely removed, pull the old fog light out of its housing, insert the new one, and secure it with the corresponding screws.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light of a Ford Fiesta
How to Replace the Fog Light of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Watch this video to learn how to replace the fog light and its bulb on a Ford Fiesta. Start by removing the plastic grille frame around the side fog …
How to Remove the Fog Light on a Ford Fiesta?
How to Remove the Fog Light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The fog light is essentially an emergency light, as it is used in very low visibility conditions, typically due to fog. This tutorial shows how to re…
How to Replace the Fog Light Bulbs on the Ford Fiesta
How to Replace the Fog Light Bulbs on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, learn how to replace the fog light bulbs on a Ford Fiesta. The first step is to remove the lower trim surrounding the fog light using a flathe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos