Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Engine

Before applying the new gasket to the rocker cover, it is essential to clean the gasket seating, both on the cover side and the cylinder head side, from any dirt and debris that could compromise the gasket's adhesion and seal. Once cleaned, without applying gasket sealant, align the new gasket to the perimeter of the cover and position it on the cylinder head, then tighten the respective fixing bolts, ensuring that the gasket does not protrude from its seating but remains aligned with the edges.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new rocker cover gasket, clean the gasket seating thoroughly, both on the cylinder head side and the cover side, removing any dir…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The intake manifold is actually made from a single plastic block that also includes the rocker cover. The intake manifold gasket consists of four O-r…
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Start by checking for any warping of the cylinder head using a straight edge and a feeler gauge for the valves and valve lift; lubricate and insert t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos