Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an Aluminium Steering Wheel on a Ford Classic

Model: Ford Ford Various
Part: Steering wheel

What could be better for a Ford Classic than a truly "old fashioned" aluminium steering wheel? Let’s see how to install the adapter and then the entire steering wheel, based on this video from an American specialist. From the steering column, the YouTuber shows us all the various parts needed for the adaptation. You can find similar parts (not those in the video which are customised, although you can always search for them on their clearly visible website) on major e-commerce platforms. Prices vary greatly depending on what you specifically need: however, by searching for "Ford steering wheel adapter", you will find many options. Follow the installation in the video: the column adapter, the intermediate cover, the slot for the wires which we will secure to the intermediate pieces. At this point, you can place the steering wheel in position, and finally connect the horn button to the terminals of the wires. Great job.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Ford radio Sync 4?
How to reset the Ford radio Sync 4?
Ford Ford Various To reset the Ford radio Sync 4, turn on the instrument cluster by rotating the key in the ignition switch. Once the instrument cluster is on, press a…
How to Remove the Stock Radio from the Ford Bronco
How to Remove the Stock Radio from the Ford Bronco
Ford Ford Various The steps necessary to safely and quickly remove the stock radio from your Ford Bronco are quite simple and take only a few seconds to complete. You …
How to deactivate the airbag on a Ford
How to deactivate the airbag on a Ford
Ford Ford Various If you intend to install a child seat in the front passenger seat, you must first deactivate the passenger airbag. The instructions and steps for dea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos