Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Discs and Pads on the Ford F-350 Super Duty

Model: Ford F-350 P473 - Years 2011-2016
Part: Brake rotors

In this guide, we will go through the steps on how to remove and replace the rear brake discs and pads on the Ford F-350 Super Duty. First, lift the vehicle and start by removing the rear wheel; then, unscrew the bolts securing the brake caliper, removing it from the disc, and then take off the brake pads. At this point, unscrew all the bolts of the disc, giving a tap on the hub to release it and remove it; then clean the braking system, install the new disc, and subsequently the new pads on the caliper, following the video until the end!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Ford F-350 Super Duty
How to Replace the Air Filter on a Ford F-350 Super Duty
Ford F-350 (1999-2007 / Phn131) .. and replace the engine air filter on a Ford F-350 Super Duty by following these simple steps. First, open the hood and locate the air filter box on.. …
How to Remove the Steering Wheel on a Ford F-250 - F-350 Super Duty
How to Remove the Steering Wheel on a Ford F-250 - F-350 Super Duty
Ford F-350 (2011-2016 / P473) .. the steering wheel on the Ford F-250 and F-350 Super Duty. First, get inside the vehicle and start unscrewing the screws located under the plastic.. …
Location of the Fuse Boxes on the Ford F-350 Super Duty
Location of the Fuse Boxes on the Ford F-350 Super Duty
Ford F-350 (2011-2016 / P473) In this video, we see the location of the fuse boxes on the Ford F-350, also known as Super Duty: in the cabin, the fuse box is located behind the gl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos