Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the onboard computer of the 2007 Ford Focus TDCi?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
This video is currently unavailable

To reset the onboard computer of the 2007 Ford Focus TDCi, get inside the car, close all the doors, and then insert and turn the key to position 1 to power on the instrument cluster without starting the engine. Now, press and hold the reset button located on the left stalk until the display shows the word TEST. Keep it pressed again until LED TEST appears and continue holding it down to scroll through all the numerous entries until LED TEST reappears.

Now you can turn off the instrument cluster and turn it back on to check that all recorded faults in the onboard computer have been reset.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Ford Focus (2018-2025 / MK 4) In this tutorial, you will see how to reset the onboard computer on the Ford Focus, a very simple and quick operation, which can be done as an attemp…
Ford Focus (2004-2011 / MK 2, Focus 2) To carry out this simple and quick task, you won't need any special tools. Just follow the steps outlined in this quick video guide to ensure all the…
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will see how to change the language of the on-board computer in the Ford Focus, a very simple and quick operation, for example,…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What does the airbag warning light on Ford Focus indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos