Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the heating resistor located in the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
This video is currently unavailable

In this video, you can see where the heating resistor is located in the Ford Focus MK2 and how to access it in case you need to replace it. As shown, it is located behind the glove compartment on the passenger side. To access it and then remove it, first open the glove compartment, then unscrew the three indicated Torx screws and remove it from the dashboard.

Move the fuse box if you need more space, locate the resistor on the side, and remove it by unscrewing the two fixing screws. Finally, follow the reverse procedure to fit the replacement part.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to replace the heating resistor in the Ford Focus?
How to replace the heating resistor in the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial we can see how to replace the heating resistor in the Ford Focus, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Fan Resistor on a Ford Focus
How to Replace the Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) How to replace the fan resistor on a Ford Focus? Follow this guide for disassembly. Remove the drawer located in the front dashboard using a lever (u…
Removing the Fan Resistor on a Ford Focus
Removing the Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Let's look at removing the ventilation fan resistor on a Ford Focus. Use a lever to remove the plastic trim inside the front dashboard (glove compart…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos