Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

To replace the battery in the remote of a Ford Focus, lower the switch located at the bottom of the device so that the emergency key can be extracted from its housing. Once this has been removed, you can leverage inside its seat: this will allow access to the battery located inside.

This can then be extracted from its housing to be replaced with a new spare part. After installation, close the remote and insert the key.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) When the remote for your Ford Focus stops working, the cause is almost always a flat battery. To replace the remote battery of a Ford Focus, you must…
Replacing the Key Fob Battery for a Ford Focus
Replacing the Key Fob Battery for a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to disassemble and replace the battery of the key fob for a Ford Focus. First, take your key fob and start by removing the rear c…
How do you replace the battery of the Ford Focus remote control?
How do you replace the battery of the Ford Focus remote control?
Ford Focus (2011-2018 / MK 3) To replace the battery of the Ford Focus remote control, you need to pry with an object like a screwdriver at the bottom of the device: by doing so, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos