Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Glow plugs

In this video tutorial, learn how to replace the glow plugs on the Ford Mondeo. First, open the bonnet and begin by removing the intake manifold by unscrewing all the screws; then disconnect the electrical connectors from the glow plugs and use a socket spanner with an extension to unscrew and remove the glow plugs, as shown in the video. Next, replace the old glow plugs with new ones of the correct type; initially screw them in by hand and then tighten with a spanner, finally reassembling the intake manifold!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Here’s the guide on how to remove and replace the glow plugs on the Ford Mondeo 2.0 TDCi engine. In this video, you will see how to carry out the rep…
Guide to Replacing Glow Plugs on the Ford Mondeo 1.8 TDCI
Guide to Replacing Glow Plugs on the Ford Mondeo 1.8 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) In today's video tutorial, you will see the steps to remove and replace the glow plugs in the Ford Mondeo 1.8 TDCI engine. First, open the bonnet and…
Replacing the Glow Plugs
Replacing the Glow Plugs
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows how to access the glow plugs (not to be confused with spark plugs) in the diesel engine of a Ford Mondeo for their replacement. The …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos