Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing Glow Plugs on the Ford Mondeo 1.8 TDCI

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Glow plugs

See other generations:
Video tutorial

In today's video tutorial, you will see the steps to remove and replace the glow plugs in the Ford Mondeo 1.8 TDCI engine. First, open the bonnet and start by removing the upper plastic cover; then disconnect the connectors from the glow plugs, using a socket wrench with an extension to unscrew and remove them, as shown in the video.

At this point, replace the diesel engine glow plugs with new ones of the correct type; screw them in by hand and then tighten with a wrench, following the video until the end!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Here’s the guide on how to remove and replace the glow plugs on the Ford Mondeo 2.0 TDCi engine. In this video, you will see how to carry out the rep…
Replacing the Glow Plugs
Replacing the Glow Plugs
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows how to access the glow plugs (not to be confused with spark plugs) in the diesel engine of a Ford Mondeo for their replacement. The …
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's guide will show us the information regarding the disassembly and replacement of the timing belt of the Ford Mondeo 2.0 TDCI; the manufacturer…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos