Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Glow plugs

This video shows how to access the glow plugs (not to be confused with spark plugs) in the diesel engine of a Ford Mondeo for their replacement. The initial images display the model of the glow plugs and their location; to replace them, first disconnect the negative terminal of the battery for safety, then remove the air intake duct. Much of the video focuses on this operation, during which the author, using a ratchet spanner with an extension, loosens and removes the bolts securing the intake duct.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing Glow Plugs on the Ford Mondeo 1.8 TDCI
Guide to Replacing Glow Plugs on the Ford Mondeo 1.8 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) In today's video tutorial, you will see the steps to remove and replace the glow plugs in the Ford Mondeo 1.8 TDCI engine. First, open the bonnet and…
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Here’s the guide on how to remove and replace the glow plugs on the Ford Mondeo 2.0 TDCi engine. In this video, you will see how to carry out the rep…
How to Replace the Glow Plugs on the Ford Mondeo
How to Replace the Glow Plugs on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) In this video tutorial, learn how to replace the glow plugs on the Ford Mondeo. First, open the bonnet and begin by removing the intake manifold by u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos