Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light in the Ford Kuga?

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

In this tutorial, you will see how to remove the oil change light in the Ford Kuga. This simple and quick operation should only be performed after changing the oil and the corresponding filter. To proceed with the reset, insert the key and leave it in the initial position. Then, press the accelerator pedal fully, keep it pressed and simultaneously turn on the ignition. At this point, quickly press the brake pedal three times in succession and release the accelerator. Ensure you complete the operation within about 3 seconds of turning on the ignition.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial, see how to reset the oil service light in the Ford Kuga, a very simple and quick operation to perform only after changing the oil a…
How to reset the oil light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The following video tutorial explains how to reset the engine oil light on a Ford Kuga model 2, independently. After completing all the steps related…
How to Reset the Service Light on a 2019 Ford Kuga
How to Reset the Service Light on a 2019 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Let's see how to reset the service light on a 2019 Ford Kuga (MK2): turn on the ignition, confirm the message "oil change required" by pressing the "…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos