Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the Ford C-Max?

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery on the Ford C-Max. For this simple and quick operation, you will need a replacement battery of type CR2032 and a small flat-head screwdriver. First, press the two side buttons to unlock the emergency key cover, then open it and remove the key. Next, use the screwdriver to pry at the joint of the remote and separate the two parts.

At this point, you can remove the old battery and insert the replacement, ensuring the correct orientation.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Ford C-MAX?
How to Replace the Remote Battery of the Ford C-MAX?
Ford C Max (2010-2019 / MK 2) As shown in this tutorial, replacing the remote battery of the Ford C-MAX is an extremely simple and quick task. You will need a replacement CR2032 b…
How to Replace the Key Fob Battery of a Ford C-Max
How to Replace the Key Fob Battery of a Ford C-Max
Ford C Max (2010-2019 / MK 2) To change the battery of the key fob for the Ford C-Max, take the fob and locate the slot along the edge of the casing. Insert a coin or a small flat…
How to Replace the Remote Battery in a Ford C-Max
How to Replace the Remote Battery in a Ford C-Max
Ford C Max (2010-2019 / MK 2) To replace the battery in the Ford C-Max remote, press the button on the top of the device to access its housing. Once the key is raised, you will ne…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos