Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Warning light – error code

In this video tutorial, you can see how to reset the service light on a Ford Transit by following a few simple steps that will guide you towards proper vehicle management and working independently. To perform this manual reset procedure for the maintenance light, first, get into your Ford Transit, engage the handbrake for added safety; insert the key and turn on the ignition, with the key in position II. As a second step, press the brake pedal and the accelerator pedal simultaneously for about 15 seconds, so the maintenance light will start flashing to indicate the reset has occurred. At this point, release both pedals and turn off the ignition. Reset completed.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) This brief guide provides instructions on how to reset the service light for routine maintenance on the Ford Transit. First, get inside the vehicle a…
Ford Transit (2006-2014 / MK 7) In this video tutorial, you can see how to reset the service light on a Ford Transit through a step-by-step procedure for proper vehicle management. …
Ford Transit (2014-2024 / MK 8) The instructions in this guide will illustrate the procedure to reset the engine oil change (service) light on a Ford Transit. First, get inside the …

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2000-2006 - Where is the radio code located for the Ford Transit 6000 CD? Read answer
    • Transit 2014-2024 - Why does the brake light stay on after a pad change in a Ford Transit? Read answer
    • Transit 2006-2014 - Why is the glow plug light flashing on my Ford Transit? Read answer
    • Transit 2006-2014 - How do you reset the brake pad warning light on Ford Transit Custom? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos