Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Ford Escape 2 oil warning light

Model: Ford Escape MK 2 - Years 2008-2012
Part: Service warning light

If the engine oil warning light comes on on the instrument panel of your Ford Escape Mk2 (year 2008-2012) even though you have recently changed the fluid and its filter, you must necessarily perform the following manual reset procedure. First, turn the key to the second position and start the ignition. Immediately afterwards, hold down the "Setup" button for a couple of seconds and then press "Reset". At this point, press the "Setup" button several times until the item relating to the residual life of the oil is displayed on the panel and keep the "Reset" button pressed until the warning light is reset.

Posted on 15 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Changing the engine oil on Ford Escape 2.5L
Changing the engine oil on Ford Escape 2.5L
Ford Escape (2008-2012 / MK 2) In today's video tutorial we discover how to change the engine oil on a Ford Escape with 2.5 liter engine produced from 2008 to 2012. We start immedi…
How to reset the oil light on Ford Escape.
How to reset the oil light on Ford Escape.
Ford Escape (2013-2019 / MK 3) In this video tutorial we can see how you can reset the oil light on Ford Escape. The first thing you need to do if the oil service light has come on…
How do i replace the Ford Escape battery?
How do i replace the Ford Escape battery?
Ford Escape (2001-2007 / MK 1) In order to replace the Ford Escape battery, you need to open the hood and locate the device, which is located in correspondence with the left headli…

Other guides you may be interested in

Remove Front Door Panel on Opel Insignia

How to remove the front door panel on an Opel Insignia? Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin the disassembly: use a lever to remove the plastic cover under the door handle, then use a screwdriver to unscrew the securing screws underneath. Once all screws are removed, detach the plastic clips that secure the door. Remove the door panel by hand, disconnect the power connectors and the door release cable.

Watch the video!


by ScegliAuto

More videos