Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on the 2014 Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Fuse box

See other generations:
Video tutorial

If you need to connect a professional diagnostic tool to your 2014 Ford Kuga but don't know where it is, don't worry because below you will find all the necessary information. First, switch off the car and go to the driver's side.

At this point, locate the small compartment situated in the lower left of the dashboard and remove the cover with your hands. Right behind it, you will finally have access to the OBD port you were looking for, and you can connect any compatible diagnostic device.

Once finished, correctly refit the protective cover.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the Ford Kuga 2025
Where to Find the OBD Port of the Ford Kuga 2025
Ford Kuga (2020-2026 / MK 3) If you don't know where the OBD port of your latest Ford Kuga (2025 model) is located, don't worry because this guide will explain step by step how t…
How do you reset the Service light on a Ford Kuga 2?
How do you reset the Service light on a Ford Kuga 2?
Ford Kuga (2012-2019 / MK 2, C520) The methods for resetting the Service light on the Ford Kuga 2 are essentially two: one more professional, carried out in a workshop using a diagnost…
Location of the EOBD port on the Ford Kuga MK2
Location of the EOBD port on the Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) In this video, you will see where the EOBD (European On Board Diagnostic) port is located on the Ford Kuga MK2: from this port, you can perform all d…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos