Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the EOBD port on the Ford Kuga MK2.

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Checks and maintenance

In this video we can see where the EOBD (European On Board Diagnostic) port of the Ford Kuga MK2 is located: from this port we can perform all the diagnoses for errors that are stored in the ECU, both with small devices for "home" diagnoses such as OBD11 or similar, which cost a few tens of euros, and with professional devices used by workshops or dealerships. We see that the EOBD port is located behind a plastic partition, which must be removed using a spatula, on the right side of the steering wheel (in the case of right-hand drive). In the case of a left-hand drive, we will find the component in exactly the opposite position, on the left side of the steering wheel.

Posted on 23 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Ford Kuga?
How to reset the service in the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial we can see how to reset the service in the Ford Kuga, an extremely simple and fast operation, to be carried out only once all schedu…
Localization and diagram of the fuse boxes of the Ford Kuga MK2
Localization and diagram of the fuse boxes of the Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video, we can see the layout and the fuse diagram of the Ford Kuga MK2 built between 2012 and 2019: we find the cabin fuse box in the typical…
How to Reset the Service Light on a Ford Kuga?
How to Reset the Service Light on a Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) Resetting the service light on a Ford Kuga, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that all…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos