Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Wheel Bearing of the Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Bearing

Today, in this video tutorial, learn how to disassemble and replace the rear wheel bearing of the Ford C-Max in simple and quick steps. First, lift the vehicle and remove the rear wheel; then unscrew the bolts of the brake caliper to remove it from the disc, as shown in the video. Next, remove the rear brake disc and unscrew the bolts of the wheel bearing to remove it and replace it with a new one; insert it in the correct orientation and reassemble everything, applying the reverse procedure of disassembly!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Bumper of Ford C Max
Removing Rear Bumper of Ford C Max
Ford C Max (2010-2019 / MK 2) Removing the rear bumper of the Ford C Max? Open the tailgate and remove the rear wheels for easier access (use a jack). Unscrew the securing screws …
Replacing the rear shock absorbers on the Ford C-Max 1
Replacing the rear shock absorbers on the Ford C-Max 1
Ford C Max (2003-2010 / MK 1) In this guide, discover how to remove and replace the rear shock absorbers or suspension on the first generation Ford C-Max in simple and quick steps…
How to Remove the Rear Bumper of the Ford C-Max
How to Remove the Rear Bumper of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Below are the instructions that will allow you to remove and replace the rear bumper of the Ford C-Max, following these simple steps. First, move to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos