Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cylinder Head Fixing Bolts

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Engine

When replacing the cylinder head gasket, it is good practice to use a new set of bolts for securing it. Check the flatness of the cylinder head and block surfaces using a straight edge and a feeler gauge. Then apply the new gasket, position the cylinder head, and use the new bolt kit for securing it, applying copper grease just under the head and on the tip of the thread. Use a torque wrench and a standard wrench to tighten the bolts in a cross pattern.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cylinder Head Fixing Pins
Replacement of Cylinder Head Fixing Pins
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) When regenerating the cylinder head with machining, grinding valve seats, replacing valve guide seals and gaskets, it is always advisable to use a ne…
Replacement of Cylinder Head Fixing Bolts
Replacement of Cylinder Head Fixing Bolts
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) When performing a repair that requires the removal of the cylinder head, it is good practice to use a new set of bolts for reattachment; start by cle…
Replacement of Cylinder Head Gasket
Replacement of Cylinder Head Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new cylinder head gasket, ensure that the surface of the head and the cylinder block is perfectly flat: use a straight bar and a …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos