Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cylinder Head Gasket Replacement

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine

See other generations:
Video tutorial

Start by checking for any warping of the cylinder head using a straight edge and a feeler gauge for the valves and valve lift; lubricate and insert the camshaft oil seal with the lip facing inwards; install the timing belt pulley; apply the new gasket and install the exhaust manifold; check the cylinder block surface again with the straight edge and feeler gauge; re-tap the threads of the cylinder head mounting holes and check for piston interference; then position the new gasket and the cylinder head, securing it with a new set of bolts tightened with a torque wrench; finally, install the rocker cover with the new gasket.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacement of Cylinder Head Gasket
Replacement of Cylinder Head Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new cylinder head gasket, ensure that the surface of the head and the cylinder block is perfectly flat: use a straight bar and a …
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating on both the cylinder head and manifold sides: remove any d…
Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new gasket to the rocker cover, it is essential to clean the gasket seating, both on the cover side and the cylinder head side, f…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos