Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Rear bumper

In this tutorial, you will see how to remove the rear bumper on a Ford Focus, a very simple and quick operation. First, open the boot. Next, undo the two bolts located next to each headlamp using a 7 mm socket spanner. Continue by unscrewing the screws located at the bottom of the wheel arches, slightly detach the two ends of the bumper, and remove the bolts that have just been freed. At this point, you can remove both headlamps, take out the two rivets located on the lower edge of the bumper, and separate the bumper from the frame by pulling it outward.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the rear bumper on a Ford Focus if damaged or if you need to remove something inside. Open and lift the tailgate, then use a screwdriver or…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (1998-2004 / MK 1) Do you want to remove the front bumper from a Ford Focus? Lift the front bonnet and let's see how to remove the front bumper. Remove the central gril…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos