Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Ford Focus 1.6 TDCi?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Starter motor

To replace the starter motor on the Ford Focus 1.6 TDCi, open the bonnet to access the components located inside the engine bay: on the right side, you will find the battery, which must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables. Once the battery is removed, you can locate the starter motor underneath, positioned between the engine block and the gearbox. By unscrewing the screws that secure it to its mounts and disconnecting the power cables, the device can be removed and replaced with a new spare part.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on a Ford Focus 1.6 TDCi MK2
Removing the Starter Motor on a Ford Focus 1.6 TDCi MK2
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to remove the starter motor on a Ford Focus 1.6 TDCi second generation, following the instructions below. First, open the bonnet of you…
How to Replace the Injectors of the Ford Focus 1.6 TDCi?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the injectors of the Ford Focus 1.6 TDCi, open the bonnet to access the engine bay and remove the plastic cover from the top of the engine…
How to replace the turbocharger of the Ford Focus 1.8 TDCi
How to replace the turbocharger of the Ford Focus 1.8 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show us how to disassemble and replace the turbocharger of the Ford Focus 1.8 TDCi. First of all, we open the hood of the car…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos