Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

In this short video tutorial, you can see how to reset the tyre pressure light, or TPMS light, on a third-generation Ford Focus, produced from 2011 to 2018. Start by turning on the vehicle's instrument panel, then press the left arrow on the steering wheel to open the menu on the information display of the speedometer. Using the buttons on the steering wheel, select the 'settings' option, then 'driver assist', and finally the tyre pressure monitoring option where you simply need to hold down the 'OK' button to reset the TPMS light.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on a Ford Focus
Ford Focus (2018-2025 / MK 4) In this video tutorial, you will learn how to reset the tyre pressure light on a fourth-generation Ford Focus; before performing any operation, ensur…
How to reset the tyre pressure warning light on the Ford Focus?
How to reset the tyre pressure warning light on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on the Ford Focus, do not perform any operations with the buttons on the steering wheel or near the instrume…
How to Reset the Tyre Pressure Warning Light on a Ford Focus?
How to Reset the Tyre Pressure Warning Light on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on a Ford Focus, first ensure all tyres are inflated to the recommended pressure: this value is indicated on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos