Do it yourself
Frequently asked questions about cars and motorcycles

How to Open a Ford Key and Clean the Oxidised Circuit

Model: Ford Ford Various
Part: Key

Video tutorial

To open your Ford key, use a spatula: start from the side with the blue oval logo. Below, you will find the physical emergency key; remove that as well.

Using the same spatula, remove the back part where the battery and the circuit board are located. Carefully use tweezers to gently take out the circuit board from its housing.

Pour some simple alcohol on the circuit. Remove the excess and pour it on the back as well.

With a very soft brush, clean all the circuits, then dab and dry with a warm hairdryer. You can now place the circuit back in its position.

Reassemble the remote following the reverse sequence. Operation completed.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Ford Ford Various In this video, you can see how to open any Ford vehicle with a flat key fob. All Ford vehicles with a keyless remote have an emergency key located un…
Ford Ford Various In this video, discover how to open a Ford key fob. You can perform this operation with a small flat-head screwdriver. Start by working on the back o…
Ford Ford Various Opening the front hood of a Ford vehicle is a simple and quick operation that can be done independently, thanks to our short video guide. To perform …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos