Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Ford Fiesta MK5

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Battery

See other generations:
Video tutorial

See how to change the battery on a Ford Fiesta MK5. Open the bonnet; the battery is located on the right side of the engine. Start by unscrewing the battery support bar with a 10 mm socket.

Now disconnect the negative terminal of the battery, ensuring the cable is well away from the battery itself. Move on to the positive terminal.

Now you can take the battery handle and remove it. Use fine sandpaper to clean the inside of the battery terminals to remove any oxidation. On the new battery, apply some copper grease to the terminals to improve contact with the cables.

Insert the new battery, reconnect the positive terminal first, then the negative. Refit the battery support bar. Job done.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Removing the Starter Motor on a Ford Fiesta MK6 1.4 Petrol
Removing the Starter Motor on a Ford Fiesta MK6 1.4 Petrol
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's video, we'll see how to remove and replace the starter motor on a Ford Fiesta sixth generation, following these simple steps. First, open …
How to replace the thermostat on a Ford Fiesta 1.4 tdCi?
How to replace the thermostat on a Ford Fiesta 1.4 tdCi?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the thermostat on a Ford Fiesta 1.4 tdCi, open the bonnet to access the engine compartment. Once the bonnet is open, remove the battery fr…
How to Replace the Battery in a Ford Fiesta
How to Replace the Battery in a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this tutorial, you will learn how to replace the battery in a Ford Fiesta. The recommended battery is the VARTA B18 12V 440A blue dynamic. First, …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos