Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ford Ranger

Model: Ford Ranger MK 3 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air filter

See other generations:
Video tutorial

To replace the air filter as a DIY task on this vehicle, you can find the instructions in this description and also in the video tutorial. First, open the bonnet and locate the box containing the filter on the left side of the engine bay. The cover of the box is secured with clips, and to release it, you will need to apply upward pressure.

Under the cover, you will find the filter that can be removed and replaced with an equivalent model with the same specifications. Then, reposition the cover and press it down to secure it; the job is complete.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Ford Ranger (2015-2019 / ) In this video, we will see how to remove the interior light fittings and replace the bulbs on a Ford Ranger T6 and T7 in simple and quick steps. Firs…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos