Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the window lifter on a Ford

Model: Ford Ford Various
Part: Warning light – error code

If you are experiencing malfunctions with the electric windows of your vehicle, perhaps after replacing the battery or if the system does not recognise the window's position, follow the instructions below and refer to the video to perform the reset. First, access the cabin, sit in the driver's seat, and close the door. Then, press the window down button until the window is fully down and hold it for another 3 seconds, then raise the window and close it completely, holding the button for a few seconds more. Repeat this procedure twice. This should complete the system's learning cycle and resolve the issue.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Ford power windows?
How do you reset the Ford power windows?
Ford Ford Various To reset the power windows on Ford vehicles, you will need to go inside the car and then lower the window that you want to reset completely: once the…
How do you reset the power windows of a Ford?
How do you reset the power windows of a Ford?
Ford Ford Various In order to reset the power windows of Ford cars, you need to go inside the car and then close completely the window you want to reset: once it is ra…
Where is the fuse box located in the 2022 Ford Maverick?
Where is the fuse box located in the 2022 Ford Maverick?
Ford Ford Various The fuse boxes of the 2022 Ford Maverick are located inside the engine compartment, near the battery, and inside the passenger side cabin under the g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos