Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Ford Fusion North America

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Cabin air filter

The following description provides instructions on how to replace the cabin air filter on this vehicle. First, access the passenger seat and open the glove compartment. Then, remove the upper plastic trim that includes the air vent and unscrew the two screws located underneath it. After that, pull the entire glove compartment towards you, and underneath, you will find the filter housing. Unscrew the screws securing the cover of the compartment, then remove the filter and replace it with the new one. Finally, close the compartment cover and reassemble the glove compartment.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Ford Fusion North America
How to Replace the Air Filter on the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) To replace the air filter, follow these steps: open the hood and locate the cover of the air filter housing, approximately in the center of the engin…
How to Replace the Outside Mirror on the Ford Fusion North America?
How to Replace the Outside Mirror on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the outside mirror on the Ford Fusion North America, you need to remove the cover of the window switch panel to access the underlying scre…
How to Replace the Front Headlight Bulb on the Ford Fusion North America?
How to Replace the Front Headlight Bulb on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the front headlight bulb on the Ford Fusion North America, open the hood to loosen the two screws that secure the headlight from the top. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos