Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt of the Ford Fiesta ST

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Timing belt

Below are the steps to remove and replace the timing belt of the Ford Fiesta ST; the replacement procedure is complex and requires patience. First, open the bonnet of your car and start disconnecting the wiring located on the left side of the engine compartment, also disconnecting the intake hose; then raise the vehicle and remove the front right wheel and the wheel arch liner, as shown in the video. At this point, remove the engine mount and then the timing belt cover; it will be necessary to remove the front right headlamp. Finally, replace the timing belt with the original one!

Updated on 10 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to replacing the timing belt of the Ford Fiesta 1.0 Ecoboost
Guide to replacing the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's main steps will show us the disassembly and replacement of the timing belt of the Ford Fiesta 1.0 Ecoboost. To access the timing belt, it is …
Replacing the Timing Belt on the Ford Fiesta 1.5 TDCi
Replacing the Timing Belt on the Ford Fiesta 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, we will go through the procedure to remove and replace the timing belt on the Ford Fiesta 1.5 TDCi, following the instructions below. First, o…
Engine timing guide for the Ford Fiesta 1.6
Engine timing guide for the Ford Fiesta 1.6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's guide will show us how to time the engine of the Ford Fiesta 1.6, following the instructions below. After replacing the timing belt, it is in…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos