Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the New Ford Bronco

Model: Ford Bronco U725 - Years 2021-2026
Part: Service warning light

If you have just serviced your new Ford Bronco but the oil warning light continues to appear on the instrument panel, don't worry; you just need to perform the following manual reset. First, enter the cabin and press the "Engine Start/Stop" button to turn on the instrument panel. Then, press the menu button located on the right side of the steering wheel and select the "Settings" option. After that, select the "Oil Life" option and hold down the "OK" button to proceed with the reset. Once finished, release the button, and you are done.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Cabin Fuses of the Ford Bronco
Where to Find the Cabin Fuses of the Ford Bronco
Ford Bronco (2021-2026 / U725) If you don't know where the box containing all the cabin fuses of your new Ford Bronco is located, don't worry because you just need to follow the st…
How to Reset the Oil Service Light on a Ford Bronco
How to Reset the Oil Service Light on a Ford Bronco
Ford Bronco (2021-2026 / U725) In this tutorial, you will learn how to reset the oil service light on a Ford Bronco, a very simple and quick operation to perform only after complet…
How to Replace the Cabin Air Filter in the New Ford Bronco
How to Replace the Cabin Air Filter in the New Ford Bronco
Ford Bronco (2021-2026 / U725) In this guide for your new Ford Bronco, you will find all the steps necessary to replace the cabin air filter. Fortunately, the entire operation is q…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos