Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter on a Ford Focus by following a few simple steps: the first thing to do is to purchase a new pollen filter; the next step is to get inside the vehicle, turn off the engine, and pull the handbrake.

The cabin filter on this vehicle is located under the dashboard on the passenger side; at this point, remove the plastic tabs that secure the cover under the glove compartment.

Once the cover is removed, to take out the cabin filter, disconnect the two electrical connectors from the fuse box by lifting the securing levers; now you can pull the filter out to remove it. After removing the old filter, replace it with the new one, positioning it according to the arrows on the filter itself.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on Ford Focus
How to Replace the Pollen Filter on Ford Focus
Ford Focus (2011-2018 / MK 3) .. How to replace the pollen filter on a Ford Focus? Follow these steps for removal: use a plastic lever.. …
How to replace the cabin filter of the Ford Focus
How to replace the cabin filter of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the pollen filter of the Ford Focus, go to the lower part where the pedals are located, and unscrew the 3 nuts holding the accelerator ped…
How to Replace the Pollen Filter on a Ford Focus
How to Replace the Pollen Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you replace the pollen filter fitted to a Ford Focus? Follow these steps to remove the filter from its designated housing. Use a plastic lever…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos