Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Ford Transit Connect

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on a Ford Transit Connect, use the controls on the left side of the steering wheel. First, turn on the ignition and the engine.

Press the left arrow once until a list appears, then press the down arrow until "settings" appears. Press the "ok" button, then press "ok" again on "driver assist". Press the down arrow until "tyre monitor" appears and press the "ok" button.

Now, hold the "ok" button until "tyre pressure stored" appears and the tyre pressure light turns off.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…
Where are the fuses located on the Ford Transit Connect?
Where are the fuses located on the Ford Transit Connect?
Ford Transit (2006-2014 / MK 7) On the Ford Transit Connect, the fuses are contained within dedicated fuse boxes installed on the vehicle: in this type of vehicle, you can find two …
How to Reset the Oil Service on a Ford Transit Connect Van?
How to Reset the Oil Service on a Ford Transit Connect Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will learn how to reset the oil service on a Ford Transit Connect van, a very simple and quick operation to perform only after …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos