Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Fog Lights

Model: Ford Focus MK 1 - Years 1998-2004
Part: Fog lights

In this case, one fog light is broken and needs replacing, while the other is damaged. First, disconnect the visible clip inside the lower grille. Next, remove the protective lens of the lamp to restore the damaged fog light. For a destroyed fog light, retrieve the tension hook and attach it to the new fog light, ensuring the correct height as shown in the video, and finally install the new lamp.
Reinstall the fog light in its housing, making sure to position it correctly.

This procedure applies to the Ford Focus 3 or 5 door models from 2002.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the front fog lights of the Ford Focus
How to install the front fog lights of the Ford Focus
Ford Focus (2004-2011 / Focus 2, MK 2) These short and simple instructions will show us how to install the front fog lights of the Ford Focus. First of all, let's move to the front and sta…
Replacement of the front fog light bulbs of the Ford Focus.
Replacement of the front fog light bulbs of the Ford Focus.
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the instructions that will allow us to disassemble and replace the front fog lights of the Ford Focus. First of all,…
Ford Focus fog lamp removal
Ford Focus fog lamp removal
Ford Focus (2011-2018 / MK 3) In this video tutorial we will see how to remove the front fog light of a Ford Focus third series. First of all, let's get the new spare part and the…

Other guides you may be interested in

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos