Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford Key Fob

Model: Ford Ford Various
Part: Key

Video tutorial

The procedure for changing the battery in a Ford key fob is the same for all models in the range and is as follows: First, extract the emergency key from the fob. Then, using a small screwdriver (in the video, they use the key itself, but this is not recommended), lever between the two plastic covers of the fob. At this point, you will see the button cell battery, which is a common CR2032 that you can find for a few pounds anywhere, in a newsagent or supermarket.

Remove the battery from its housing with the same screwdriver and replace it with a new one. Ensure you position it with the correct polarity.

Refit the plastic cover and reinsert the emergency key into its housing. Task completed.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Ford key
How to replace the battery in the Ford key
Ford Ford Various Three simple steps make up the procedure for replacing the Ford key battery. The first step is to unscrew the screw located behind the remote control…
How to replace the battery of a Ford vehicle's remote control
How to replace the battery of a Ford vehicle's remote control
Ford Ford Various Today we will explain how to replace the battery of a Ford vehicle remote control. The steps to follow are simple and quick; to replace the battery w…
How to replace the battery of the remote control for Ford vehicles Puma, Kuga, Ecosport, and Focus
How to replace the battery of the remote control for Ford vehicles Puma, Kuga, Ecosport, and Focus
Ford Ford Various Replacing the battery of the remote control for Ford Puma, Kuga, Ecosport, and Focus vehicles is a very simple and quick operation to perform indepen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos