Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Ford Focus 3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Service warning light

In this short video tutorial, you will see how to reset the service light on a Ford Focus MK3, a model produced from 2011 to 2018. The first step is to press the brake and accelerator pedals simultaneously. Next, insert the key into the ignition and turn it to the first position to activate the instrument cluster. Wait for about 15 to 20 seconds with the pedals pressed until the display shows a message confirming the reset is complete. Finally, switch off and restart the vehicle to verify the reset.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) This video shows how to reset the oil service indicator on a Ford Focus. This operation is very simple; enter the vehicle, put it in neutral, and tur…
Ford Focus (2011-2018 / MK 3) In today's video, see how to reset the service light on the Ford Focus. First, ensure you perform the correct maintenance as outlined in the vehicle'…
Ford Focus (2011-2018 / MK 3) To reset the service indicator on a Ford Focus, follow these steps: First, turn on the ignition without starting the engine. Press the accelerator an…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos