Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Tyre Pressure Light on a Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part:

This very short video tutorial demonstrates how to reset the tyre pressure warning light on a Ford Focus mk4. The first step is to turn on the instrument cluster without starting the vehicle's engine. Next, open the menu on the information display by pressing the appropriate button located on the right side of the steering wheel. Once done, scroll through the options to select "information" using the "ok" button, then select the "tyre pressure" option. Within this last option, press the "ok" button again to select the reset and hold it until the process is complete.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on a Ford Focus?
How to reset the tire pressure light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) In this tutorial, we can see how to reset the tire pressure light in the Ford Focus, an extremely simple and quick operation, to be carried out only …
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to reset the tyre pressure warning light on the Ford Focus?
How to reset the tyre pressure warning light on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on the Ford Focus, do not perform any operations with the buttons on the steering wheel or near the instrume…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos