|
Do it yourself
| |||
| ||||
How the Steering Wheel Controls Work on a Ford Focus
Model: Ford Focus
MK 4
- Years 2018-2025
Let’s see how the light controls and those on the steering wheel work on the Ford Focus. When the vehicle is started, the lights automatically position themselves, meaning they turn on by themselves when the light sensors detect dusk or darkness. Naturally, you can adjust them manually as desired. On the high beam lever, you also have the indicators and the option to set the lane keeping assist. On the right side, there is the wiper lever, with positions upwards. The first is for the automatic rain sensor, where you can set a different level of sensitivity using a dial. Pulling the lever towards you activates the rear wiper. On the left side of the steering wheel, you have the speed limiter, allowing you to set a maximum speed not to be exceeded, with the option to increase or decrease it using the +/– buttons. On the right side, you have access to the onboard computer, with a scrolling button that allows you to scroll through the various options. At the back, there are the voice call buttons.
Updated on 10 August 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Ford Focus
(2011-2018 /
MK 3)
To replace the climate control switches on the Ford Focus, you need to detach the panel above the switches: underneath it, loosen the screws present,…
Ford Focus
(2018-2025 /
MK 4)
Learn how to reset the service light for routine maintenance on a Ford Focus in simple, quick steps. First, get into the vehicle and turn on the igni…
Ford Focus
(2011-2018 /
MK 3)
Below are the steps to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus; before resetting the TPMS sensors, ensure all four tyr…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.296
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |