Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, follow the instructions to open the rear boot of a Ford Focus in case of emergency. First, open the rear doors and recline the seats to access the boot area; then remove the small plastic caps at the bottom and unscrew the screws inside using a Torx key, as shown in the video.

At this point, push and open the boot from the inside; it is recommended to replace the boot lock afterwards!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Replace the Boot Lock of the Ford Focus
How to Replace the Boot Lock of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's step-by-step instructions will show you how to remove and replace the lock of the rear tailgate of the Ford Focus. First, open the boot and b…
How to Replace the Boot Release System on a Ford Focus
How to Replace the Boot Release System on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove and replace the rear boot release system on a Ford Focus. After opening the boot, unscrew the screws that hold…
How to replace the gear knob in the Ford Focus?
How to replace the gear knob in the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, we can see how to replace the gear shift knob in the Ford Focus, a very simple and quick operation. First, let's go inside the cabi…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos