Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Ford Puma?

Model: Ford Puma Coupe - Years 1997-2002
Part: Door trim panel

To remove the door panel of the Ford Puma, you need to detach the triangular cover located on the inside near the external mirror. Once this is removed, you will need to take out the circular plugs on the panel, near the internal handle and speaker. Once these plugs are removed, you can locate the screws underneath, which must be completely removed. This will allow the door panel to be taken out of its housing. The new panel can then be inserted and secured with the corresponding screws.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Puma 2022 remote control
How to replace the battery of the Ford Puma 2022 remote control
Ford Puma (2019-2026 / MK 1) In this new guide you will find the description of all the steps you need to follow to correctly replace the battery inside the remote control of you…
How to replace the cabin filter in the Ford Puma DIY
How to replace the cabin filter in the Ford Puma DIY
Ford Puma (2019-2026 / MK 1) On the Ford Puma 1.0 Hybrid, the cabin filter can be accessed from the passenger side. With the vehicle stationary and the power off, open the glove …
Location of the fuse boxes in the Ford Puma
Location of the fuse boxes in the Ford Puma
Ford Puma (2019-2026 / MK 1) If you need to work on the electrical system or components of the Ford Puma, it is important to know the exact location of the fuse boxes to check th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos