Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Tyre Pressure on a Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

This useful tutorial shows you how to reset the tyre pressure on your Ford C-Max, second generation model produced from 2010 to 2019. Start by turning on the ignition of the vehicle, then press the left arrow on the steering wheel to open the menu on the speedometer display.

Next, select "settings", then "driver assistance", and finally select "tyre monitor". Hold down the "OK" button on this last option to reset the tyre pressure.

Before performing this operation, it is important to check the correct pressure of all four tyres.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Sensors on a Ford C-MAX
How to Reset the Tyre Pressure Sensors on a Ford C-MAX
Ford C Max (2010-2019 / MK 2) Today, you will learn how to reset the tyre pressure sensors on a Ford C-MAX, second generation model. To carry out this procedure, you will need a s…
How to reset the tyre pressure warning light on a Ford C Max?
How to reset the tyre pressure warning light on a Ford C Max?
Ford C Max (2010-2019 / MK 2) After checking the tyre pressure and replacing any worn tyres, follow the instructions shown in the video to reset the tyre pressure warning light. A…
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) Follow these step-by-step instructions to reset the tyre pressure warning light on the Ford C-Max; before performing the reset, ensure all four tyres…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos