Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on a Ford C-MAX

Model: Ford C Max MK 2 - Years 2010-2019
Part: Checks and maintenance

Today we can see how to reset the tire pressure sensors on a second generation Ford C-MAX. To perform this procedure we will need a specific reset tool that we can buy on various online sites for a few tens of euros. Let's start by turning on the vehicle's ignition in the first position, then press the emergency flashers button six times to enter sensor learning mode. Once done, we approach the reset tool to the front left wheel and hold down its button until the car horn sounds indicating sensor learning, then we perform the same procedure on the remaining sensors proceeding clockwise as shown in the video.

Posted on 18 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset Tyre Pressure on a Ford C-Max
How to Reset Tyre Pressure on a Ford C-Max
Ford C Max (2010-2019 / MK 2) This useful tutorial shows you how to reset the tyre pressure on your Ford C-Max, second generation model produced from 2010 to 2019. Start by turnin…
How to reset the tyre pressure warning light on a Ford C Max?
How to reset the tyre pressure warning light on a Ford C Max?
Ford C Max (2010-2019 / MK 2) After checking the tyre pressure and replacing any worn tyres, follow the instructions shown in the video to reset the tyre pressure warning light. A…
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) Follow these step-by-step instructions to reset the tyre pressure warning light on the Ford C-Max; before performing the reset, ensure all four tyres…

Other guides you may be interested in

    Frequently Asked Questions

    • C Max 2010-2019 - Why is the tire sensor not detected on the Ford C Max? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos