Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Schema and positioning of fuses in the Ford Focus.

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fuse box

Today's guide will show us the layout and diagram of the fuses in the Ford Focus. First, let's locate the external fuse box, located in the engine compartment; we remove the plastic cover to access it. We find the internal fuse box on the passenger side, under the glove compartment, as shown in the video; the diagram and layout of the fuses are also shown, where each fuse is associated with a code and its corresponding amperage (useful for replacing any faulty fuse). The fuse layout is also available in the owner's manual!

Posted on 14 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus fuse schema and positioning
Ford Focus fuse schema and positioning
Ford Focus (2004-2011 / MK 2, Focus 2) Below we will see the steps that will allow us to discover the positioning and diagram of the fuses in the Ford Focus. First, we open the front door …
Diagram and positioning of internal fuses in the Ford Focus.
Diagram and positioning of internal fuses in the Ford Focus.
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide we will see how to access the internal fuse box of the Ford Focus, also finding the fuse diagram and chart. First, we open the front do…
Positioning the Ford Focus MK1 fuse box
Positioning the Ford Focus MK1 fuse box
Ford Focus (1998-2004 / MK 1) In today's video guide we will see the positioning of the fuse box and the related codes of a Ford Focus first series. We get inside the car and go t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos