Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Panel from a Ford Transit Custom MK7

Model: Ford Transit MK 7 - Years 2006-2014
Part: Body

In this video, learn how to remove the interior panel from a Ford Transit Custom MK7: start with the two screws located under the panel, and approximately halfway up the panel, there is a T20 Torx screw; on the outer side, there is a reflector, which has another T20 Torx screw underneath. Additional screws are located under the handle cover, where you will find a T25 and a T27. Below the internal door lock, there is another T20 and another one under the electric window switch, which can be easily lifted with a flat screwdriver, and again in the outer frame of the trim, on the locking side. Once all screws are removed, pull the cover towards you and carefully disconnect all electrical connectors. Operation completed.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Ford Transit Custom?
How do you replace the battery of the Ford Transit Custom?
Ford Transit (2006-2014 / MK 7) The procedure for replacing the battery on the Ford Transit Custom involves pushing the front passenger seat completely forward so that the panel und…
Where is the fuse box of the Ford Transit Custom 2024 located?
Where is the fuse box of the Ford Transit Custom 2024 located?
Ford Transit (2012-2024 / Custom) In this new mini guide aimed at those of you who own a 2024 Ford Transit Custom, we will help you easily find the box containing all the vehicle's fu…
How do you reset the Service light on the Ford Transit Custom?
How do you reset the Service light on the Ford Transit Custom?
Ford Transit (2012-2024 / Custom) The Service indicator that is shown on the instrument panel of the Ford Transit Custom can be reset by holding down the accelerator and brake pedals …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos