Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Roof Rails on the Ford Kuga

Model: Ford Kuga MK 3 - Years 2020-2026
Part: Body

In this guide, learn how to correctly install roof rails on the Ford Kuga. First, remove the side body protection on the roof to mount the bars. Roof rails are widely available on e-commerce platforms; since they come in various shapes and colours, we won't suggest a specific option. Once the protections are removed, take out the screws located inside. Measure and drill holes in the protections, then reposition them and reinsert the screws from above. Now, you can place the roof rails by screwing them onto the screws. Job done.

Updated on 6 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) In this video, we see how to install the roof rails on a Ford Kuga MK2: first, we need to remove the rubber seal from the designated housing on both …
Ford Kuga (2012-2019 / C520, MK 2) The vehicle shown for the programming procedure of the sunroof and blind is the Ford Escape, but the same sequence applies to the Ford Kuga. You need…
Ford Kuga (2012-2019 / C520, MK 2) This guide explains how to install the additional rear spoiler on the Ford Kuga, following the instructions below. First, move to the rear of your ca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos