Do it yourself
Frequently asked questions about cars and motorcycles

How to Reprogram the Sunroof of the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Body

The vehicle shown for the programming procedure of the sunroof and blind is the Ford Escape, but the same sequence applies to the Ford Kuga. You need to store the start and end points; otherwise, there is no possibility for the two elements mentioned to function. To proceed, with the sunroof and blind closed, turn the ignition on, off, and then on again, then press the button to open and close the sunroof. The exact same procedure must be followed for the blind, using the button that controls its opening and closing.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) To reprogram the electric windows of the Ford Kuga, start by getting inside the car, turning on the instrument panel, and starting the engine. With t…
Ford Kuga (2020-2026 / MK 3) In this guide, learn how to correctly install roof rails on the Ford Kuga. First, remove the side body protection on the roof to mount the bars. Roof…
Ford Kuga (2012-2019 / C520, MK 2) In this video, we see how to install the roof rails on a Ford Kuga MK2: first, we need to remove the rubber seal from the designated housing on both …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos