Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

This video shows how to reset the oil light on the Ford Focus. To perform this procedure, start the ignition; once the oil light appears, turn off the ignition, press the brake and accelerator pedals simultaneously, and while holding them down, start the ignition again.

The reset will begin; keep the pedals pressed until the message indicating the successful reset of the oil change light appears on the dashboard. You can then release the pedals and restart the ignition to verify that the reset was successful.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Warning Light on Ford Focus MK2
How to Reset the Oil Change Warning Light on Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) Follow these steps to reset the service warning light for the oil change on a second-generation Ford Focus. First, get inside the car and press both …
How to Reset the Oil Change Light on the 2012 Ford Focus?
How to Reset the Oil Change Light on the 2012 Ford Focus?
Ford Focus (2011-2018 / MK 3) On the 2012 Ford Focus, it is very easy to reset the engine oil change light; just follow these simple steps outlined in the video. This procedure is…
How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to independently reset the service light, related to the oil change of the Ford Focus produced from 2012 to 2018. To reset …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos