|
Do it yourself
| |||
| ||||
How to Disconnect the Battery on the Ford Transit Tourneo Custom
Model: Ford Transit
MK 8
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
In this video, you can see how to disconnect the battery on the Ford Transit Tourneo Custom: the battery is located under the driver's seat, so first, you will need to remove it. The screws for the seat are located inside the rails, and to start, you can remove the first two screws found right at the front; then move the seat all the way forward, and similarly, you will find one screw on each side at the back. Once these four screws are removed, the seat can be taken out, giving you access to the battery compartment: You can access the positive and negative terminals without needing to remove the entire battery, just by removing the covers located at the bottom of the compartment. The negative terminal is on the right side.
Updated on 8 September 2026 by ScegliAuto
Related tutorials
Ford Transit
(2014-2024 /
MK 8)
The video available here shows how to reset the warning light in the Ford Tourneo, but this method is also valid for the Ford Transit Custom. The ant…
Ford Transit
(2012-2024 /
Custom)
The 12-volt battery that powers the Ford Transit Custom is not located in the engine bay, as is the case with most vehicles, but rather in the cabin,…
Ford Transit
(2012-2024 /
Custom)
In this new mini guide aimed at those of you who own a 2024 Ford Transit Custom, we will help you easily find the box containing all the vehicle's fu…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |