Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handbrake Console on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Checks and maintenance

In this tutorial, you will see how to remove the handbrake console on the Ford Fiesta, a very simple operation, for example, to retrieve items that have fallen into the hole at the base of the lever, a common situation in this vehicle. First, go to the rear seat, then grasp the rear edge of the console and pull it upwards. If necessary, you can use a plastic spatula to assist. Once done, pull the console towards you to detach the front side from the respective supports. Follow the reverse procedure to reassemble everything.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake Cable on the Ford Fiesta
How to Adjust the Handbrake Cable on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) These brief and simple steps will show you how to adjust the handbrake on the Ford Fiesta. First, get into the vehicle and start by removing the plas…
Adjusting the Handbrake on the Ford Fiesta
Adjusting the Handbrake on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) If pulling the handbrake lever on the Ford Fiesta does not provide sufficient braking even when fully pulled, you can adjust its setting. Sit in the …
Adjustment of Handbrake Travel
Adjustment of Handbrake Travel
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The adjustment of the handbrake is performed using a nut located directly under the handbrake lever: pull the handbrake fully to access the adjustmen…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos