Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Ecosport
  6. : Guide to replacing the timing belt of the Ford Ecosport

Ford Ecosport - Video tutorial

Model: Ford Ecosport MK 1, BK - Years 2012-2023
Part: Timing belt
Operation: Guide to replacing the timing belt of the Ford Ecosport

Below we will see the main instructions useful for disassembling and replacing the timing belt of the Ford Ecosport. First, lift the car and remove the front right wheel, then remove the fender; then disconnect the V-belt and remove the crankshaft pulley, as shown in the video. At this point, remove the engine support and remove the distribution cover, taking the necessary references for the replacement of the timing belt; replace the belt and reassemble everything, following the video tutorial until the end!


Posted on 25 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ecosport 2012-2023 - When to change the timing belt in Ford Ecosport? Read Answer
    • Ecosport 2012-2023 - When to replace the timing belt in Ford EcoSport? Read Answer
    • Ecosport 2012-2023 - How often should the Ford Ecosport timing belt be replaced? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos