Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to reset the oil service on the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Engine oil
Operation: How to reset the oil service on the Ford Focus?

In this tutorial we can see how to reset the oil service in the Ford Focus, an extremely simple and quick operation. Before proceeding, we must have completed the required scheduled maintenance work. We start by going inside the cabin, then insert the key but leave it in the initial position. We then press both the accelerator and brake pedals, simultaneously turn on the instrument panel and keep both pedals in position for the necessary time to display the confirmation message. Finally, restart the vehicle.


Posted on 6 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - What is the amount of engine oil needed for replacement on a Ford Focus 1.6 TDCi 90hp? Read Answer
    • Focus 2018-2025 - What is the right amount of engine oil for the Ford Focus 1.5 EcoBlue? Read Answer
    • Focus 2018-2025 - Why does the "change engine oil" light come on on the Ford Focus? Read Answer
    • Focus 2011-2018 - How much engine oil do you need for a Ford Focus 1.5 TDCi 120 hp? Read Answer
    • Focus 2004-2011 - How many liters of engine oil go on a Ford Focus 1.8 tdci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos