Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset BMS on a Ford Mondeo MK4

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Warning light – error code

Thanks to this useful video tutorial today, you will see how to reset the BMS (Battery Monitoring System) light on a Ford Mondeo, fourth generation model produced from 2014 to 2021. Start the procedure by turning on the vehicle's ignition without starting the engine; then press the fog light button, located to the right of the daytime running lights and dipped beam lever, five times, and then press the hazard light button three times. At this point, the battery light on the speedometer will start to flash and will eventually reset as shown in the video.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Battery Management System (BMS) on a Ford Mondeo
How to Reset the Battery Management System (BMS) on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Here are the instructions for resetting the Battery Management System (BMS) on a Ford Mondeo after a battery change. First, get into the vehicle and …
Resetting the BMS System on a 2015 Ford Mondeo
Resetting the BMS System on a 2015 Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) The video shows how to reset the BMS system, which is the battery monitoring system, on a 2015 Ford Mondeo. This is a simple operation that can be co…
BMS Reset on a Ford Mondeo MK5
BMS Reset on a Ford Mondeo MK5
Ford Mondeo / Fusion (2022-2026 / MK 5) In today's video, you will see how to reset the BMS, or Battery Monitoring System, on a Ford Mondeo, fifth generation model produced from 2022 onward…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos